Akulööktrell, 20V, 120Nm, POWDP15250 POWERPLUS

This cordless 20 V impact drill/screwdriver by Dual Power is perfect for all those heavy-duty projects in and around the house that require screws or (impact) drilling.

With a maximum torque as high as 120 Nm, it’s important to always use the auxiliary handle and its extension piece when (impact) drilling. This prevents serious injuries.

What can you do with this impact drill/screwdriver?

This impact drill/screwdriver is a powerful allrounder that can be used for both drilling and driving screws. Use it to effortlessly drill up to 65 mm in wood, 13 mm in steel, and 16 mm in concrete.

The battery and charger are not included. They are sold separately and are compatible with the entire Dual Power range.

Its strong points:

• Adjustable torque and speed: Choose between 2 different speed settings and 20 torque settings to fully adjust the tool to your project. The highest rotational speed setting (0 min-1 – 2000 min-1) is for drilling and the lower speed (0 min-1 – 600 min-1) for driving screws.
• Extra powerful: With a maximum torque of 120 Nm, this impact drill and screwdriver far outshines its peers in terms of power. This tool can take on tougher materials, can work with longer screws and drill bigger holes.
• Fasten or loosen: Use the practical left/right switch to either fasten or loosen screws.
• Soft start motor: The machine is equipped with a soft start system, which causes the motor to gradually get up to speed. This is safer and provides more control.
• Quick stop: Should anything go wrong, the quick stop immediately shuts off the tool to ensure safe operating at all times.
• Overload protection: The overload protection prevents the electric motor from overheating and becoming overloaded. It automatically shuts off the motor when there’s a steep increase in temperature.
• Spindle lock: The spindle lock temporarily blocks the chuck, so switching between accessories is quick and easy.
• Adjustable auxiliary handle: The auxiliary handle provides an even firmer grip and you can attach it to the left or right, so you can always grasp the tool in the most comfortable position.

Tips & tricks:

• Be sure to use a wall detector (our KRT706400 for example) before drilling, so you don’t damage any cables or pipes that are behind the wall.
• Don’t wear your hair down and don’t wear clothes that are too loose. They can get tangled in the tool and cause serious injuries.
• To guarantee your safety, always use the auxiliary handle and its extension piece when drilling or impact drilling.

Its key technical specifications:

• Rated power: 20 V
• Rotational speed: 0 min-1 – 600 min-1 / 0 min-1 – 2000 min-1
• Max. torque: 120 Nm
• Drill chuck: max. Ø13 mm
• Number of torque settings: 20
• Strikes per minute: 9000 strks/min – 30000 strks/min
• Rated Voltage DC (Un) max: 20 V
• Min. Drill bit diameter: 1,5 mm
• Sound Power Level (LwA): 98 dB(A)
• Max. Drill bit diameter: 13 mm
• Max. Torque: 120 Nm
• Drill capacity stone: 16 mm
• Batteries necessary (amount): 1
• 2nd Batteries included (amount): 0
• Torque positions: 20
• Number of speed settings: 2
• Storage type: Cardboard case
• Direction of rotation: [ "Left", "Right" ]
• Rotation speed (n) min: 0 min-1
• Rotation speed (n) max: 600 min-1
• Drill capacity steel: 13 mm
• Drill capacity wood: 65 mm
• Impact rate max: 30000 strks/min
• Drill capacity concrete: 16 mm

What is included?

• 1x impact drill - screwdriver
• 1x belt clip
• 1x auxiliary handle
• 1x screw
• 1x extension piece
• 1x manual